The OXWELD automated dispenser is designed for general powder cutting and scarfing operations. It can be used with any powder cutting or scarfing torch, and with any powder cutting attachment. An accessory ejector nozzle (part no. 65Z49) with a smaller orifice than the standard nozzle is available for fine control and maximum economy of Iron powder flow in the continuous high-precision cutting of material less than 2 inches thick.

• Dispensers are sturdily constructed.  Container is a one-piece shell with an easily removed cover secured by heavy swivel-mounted screws and wing nuts, with a capacity of 400 lbs. 
• A removable screen is fitted into the top of the hopper to sift out any lumps of powder or foreign material, which might otherwise clog the flow or cause erratic operation of the powder ejector unit. 
• Operating components (ejector, Oxygen regulator, relief valve, solenoid valves, etc.) are mounted outside the dispenser to simplify maintenance. 
• The dispensers are equipped with a mechanical Oxygen dryer/filter to eliminate air-entrained foreign particles and to prevent powder from becoming damp and clogging the ejector and powder hose. 
• Manipulating the powder ejector adjusting screw by hand readily controls powder flow. 
• All dispensers are equipped with an Oxigen safety relief valve.